PBS ProTrack Performance Brake Pads (REAR) - Volkswagen Scirocco R 137
PBS Protrack Brake Pads are high performance track brake pads that provide a great bite with pedal feel from cold.
With excellent brake fade resistance and an operating temperature of 0 to 700°C, this pad posses a lower initial bite with a great pedal feel and stopping power, making them a perfect for light track use, wet conditions or for those with low grip control tyres.
Perfect for sprints, time attack and circuit racing.
When on track, brake pads are subjected to pressure from caliper pistons as well as high friction heat. Performance Brake Solutions have undergone extensive brake pad testing in order to keep the brake pad remaining flat throughout the race in order to offer optimal performance. The technology used on the high quality steel backing plates ensure that the brake pad compound has the best holding capabilities under extreme driving conditions.
The Protrack brake pad material is 0.40 to 0.48mu, which provides progressive and predictable braking power.
Made by racing drivers for racing drivers.
Supplied as a set.
A direct fit for:
- Audi A3 1.8/2.0 TFSI Quattro 8P
- Audi A3 1.9/2.0 TDI Quattro 8P
- Audi A3 2.0 TDI 8P
- Audi A3 3.2 V6 Quattro 8P
- Audi S3 Quattro 8P
- Audi RS3 Quattro 8P
- Audi A4 1.8T B7
- Audi A4 1.8T Quattro B7
- Audi A4 1.9/2.0 TDI B7
- Audi A4 2.0 FSI B7
- Audi A4 2.0 TDI Quattro B7
- Audi A4 2.0 TFSI B7
- Audi A4 2.0 TFSI Quattro B7
- Audi A4 2.5/2.7 TDI B7
- Audi A4 3.0 Quattro B7
- Audi A4 3.0 TDI Quattro B7
- Audi A4 3.2 FSI B7
- Audi A6 2.0 TDI C6
- Audi A6 2.0 TFSI C6
- Audi A6 2.4 C6
- Audi A6 2.4 Quattro C6
- Audi A6 2.7 TDI C6
- Audi A6 2.7 TDI Quattro C6
- Audi A6 2.8 FSI C6
- Audi A6 2.8 FSI Quattro C6
- Audi A6 3.0 TDI C6
- Audi A6 3.0 TDI Quattro C6
- Audi A6 3.0 TFSI Quattro C6
- Audi A6 3.2 FSI C6
- Audi A6 3.2 FSI Quattro C6
- Audi A6 4.2 FSI Quattro C6
- Audi TT 1.8 TFSI 8J
- Audi TT 2.0 TDI Quattro 8J
- Audi TT 2.0 TFSI 8J
- Audi TT 2.0 TFSI Quattro 8J
- Audi TTS Quattro 8J
- Audi TTRS Quattro 8J
- Audi TT 2.5 TFSI Quattro 8J
- Audi TT 3.0 V6 Quattro 8J
- SEAT Leon 2.0 TFSI 1P
- SEAT Leon Cupra R 1P
- SEAT Leon 1.8 TFSI 5F
- SEAT Leon 2.0 TDI 5F
- SEAT Leon Cupra 5F
- Volkswagen Golf 3.2 1K/MK5
- Volkswagen Golf 3.2 R32 4Motion 1K/MK5
- Volkswagen Golf 2.0 TDI 5K/MK6
- Volkswagen Golf 2.0 4Motion 5K/MK6
- Volkswagen Golf GTI 5K/MK6
- Volkswagen Golf R 5K/MK6
- Volkswagen Golf R 4Motion 5K/MK6
- Volkswagen Golf 2.5 5K/MK6
- Volkswagen Scirocco 1.4 TSI 137
- Volkswagen Scirocco 2.0 TDI 137
- Volkswagen Scirocco 2.0 TSI 137
- Volkswagen Scirocco R 137
PBS Brake Pad Bedding-in Process:
PBS brake pads are put through a heat curing treatment during the manufacturing process and 'burns out' unwanted materials in advance, reducing the gases that can cause brake fade. Because of this treatment, PBS brake pads only require light 'bedding in'.
It is recommend to perform 10 stops at low pressure and low temperature from 90MPH to approximately 50MPH, and the distance between each brake stop is to be approximately 600 to 800 meters.
PBS brake pads should be bedded in until they are up to mid range working temperature and then allowed to cool properly. Doing this process will help to remove any gases that were in the brake pad compound and will create a perfect contact pattern between the brake disc and the brake pads.
note: image is for illustration purposes and may differ on delivery