PBS ProTrack Performance Brake Pads (REAR) - Renault Megane II RS 225-230

  • Part Number: 8152PT
Fitment Confirmation: Yes, I can confirm these fit my application
Yes, I can confirm these fit my application
Regular price £119.99
Sale price

PBS Protrack Brake Pads are high performance track brake pads that provide a great bite with pedal feel from cold.

With excellent brake fade resistance and an operating temperature of 0 to 700°C, this pad posses a lower initial bite with a great pedal feel and stopping power, making them a perfect for light track use, wet conditions or for those with low grip control tyres.

Perfect for sprints, time attack and circuit racing.

When on track, brake pads are subjected to pressure from caliper pistons as well as high friction heat. Performance Brake Solutions have undergone extensive brake pad testing in order to keep the brake pad remaining flat throughout the race in order to offer optimal performance. The technology used on the high quality steel backing plates ensure that the brake pad compound has the best holding capabilities under extreme driving conditions.

The Protrack brake pad material is 0.40 to 0.48mu, which provides progressive and predictable braking power.

Made by racing drivers for racing drivers.

Supplied as a set.

A direct fit for:

  • Audi A1/A2/A3/A4/A6/A8 with Lucas Caliper
  • Audi TT Quattro 3.2 8N
  • Citroen DS3
  • Honda Accord Type S CL9
  • Honda Accord Type S CH1
  • Peugeot 207 with Lucas Rear Caliper
  • Peugeot 208 with Lucas Rear Caliper
  • Peugeot 208 GTI with Lucas Rear Caliper
  • Porsche Panamera (970) 3.6 2010+
  • Renault Clio III RS 197
  • Renault Clio III RS 200
  • Renault Clio IV RS 200T
  • Renault Clio IV RS 220T
  • Renault Megane II RS 225
  • Renault Megane II RS 230
  • Renault Megane III RS 250
  • Renault Megane III RS 265
  • Renault Megane III RS 275
  • Renault Twingo RS
  • SEAT Ibiza with Lucas Rear Caliper
  • SEAT Leon with Lucas Rear Caliper
  • Skoda Fabia with Lucas Rear Caliper
  • Skoda Octavia with Lucas Rear Caliper
  • Volkswagon Polo with Lucas Rear Caliper
  • Volkswagon Bora with Lucas Rear Caliper
  • Volkswagon Golf with Lucas Rear Caliper
  • Volkswagon Passat with Lucas Rear Caliper
  • Volkswagon Scirocco with Lucas Rear Caliper

PBS Brake Pad Bedding-in Process:

PBS brake pads are put through a heat curing treatment during the manufacturing process and 'burns out' unwanted materials in advance, reducing the gases that can cause brake fade. Because of this treatment, PBS brake pads only require light 'bedding in'.

It is recommend to perform 10 stops at low pressure and low temperature from 90MPH to approximately 50MPH, and the distance between each brake stop is to be approximately 600 to 800 meters.

PBS brake pads should be bedded in until they are up to mid range working temperature and then allowed to cool properly. Doing this process will help to remove any gases that were in the brake pad compound and will create a perfect contact pattern between the brake disc and the brake pads.

note: image is for illustration purposes and may differ on delivery

Recently Viewed

Don't forget! The products that you viewed. Add it to cart now.