PBS ProTrack Performance Brake Pads (FRONT) - Renault Clio MK3 RS 197/200 & Megane MK2 RS 225/230
PBS Protrack Brake Pads are high performance track brake pads that provide a great bite with pedal feel from cold.
With excellent brake fade resistance and an operating temperature of 0 to 700°C, this pad posses a lower initial bite with a great pedal feel and stopping power, making them a perfect for light track use, wet conditions or for those with low grip control tyres.
Perfect for sprints, time attack and circuit racing.
When on track, brake pads are subjected to pressure from caliper pistons as well as high friction heat. Performance Brake Solutions have undergone extensive brake pad testing in order to keep the brake pad remaining flat throughout the race in order to offer optimal performance. The technology used on the high quality steel backing plates ensure that the brake pad compound has the best holding capabilities under extreme driving conditions.
The Protrack brake pad material is 0.40 to 0.48mu, which provides progressive and predictable braking power.
Made by racing drivers for racing drivers.
Supplied as a set.
A direct fit for:
- Abarth 500 (Brembo calipers only)
- Abarth 595 (Brembo calipers only)
- Abarth 695 (Brembo calipers only)
- Abarth Grande Punto (Brembo calipers only)
- Abarth Punto (Brembo calipers only)
- Abarth Punto EVO (Brembo calipers only)
- Alfa Romeo C4 (Brembo calipers only)
- Alfa Romeo MiTo (Brembo calipers only)
- Renault Alpine A110 II
- Renault Clio III RS 197
- Renault Clio III RS 200
- Renault Megane II RS 225
- Renault Megane II RS 230
- Vauxhall Corsa VXR D (Nurburgring Edition models only)
- Vauxhall Corsa VXR E (Brembo calipers only)
PBS Brake Pad Bedding-in Process:
PBS brake pads are put through a heat curing treatment during the manufacturing process and 'burns out' unwanted materials in advance, reducing the gases that can cause brake fade. Because of this treatment, PBS brake pads only require light 'bedding in'.
It is recommend to perform 10 stops at low pressure and low temperature from 90MPH to approximately 50MPH, and the distance between each brake stop is to be approximately 600 to 800 meters.
PBS brake pads should be bedded in until they are up to mid range working temperature and then allowed to cool properly. Doing this process will help to remove any gases that were in the brake pad compound and will create a perfect contact pattern between the brake disc and the brake pads.
note: image is for illustration purposes and may differ on delivery