Before you leave...
Take 20% off your first order
20% off
Enter the code below at checkout to get 20% off your first order
Free Delivery on selected items*
Forge Motorsport Twintercooler for Golf GTi Mk7
Brand:
Forge Motorsport
SKU:
FMINTMK7
- £648.89
- £648.89
- Unit price
- per
PRICE MATCH GUARANTEE
If you find a lower price at an eligible UK retailer website, we will match it.
WORKSHOP FITTING SERVICE
Looking for a garage for tuning, servicing or fitting? Contact us for a quote.
Product Description
Moving on from our tried and tested Twintercooler setup on the Mk5 and Mk6, this intercooler has been designed to run in parallel with the stock core, or if you prefer for the ultimate cooling solution you can use it with our FMMK7FMIC intercooler (which mounts in the stock location and offers much improved cooling by itself). The Twintercooler core sits out in front of the standard radiator/intercooler/air con condensor pack and as such is in the direct line of all the cold air coming in the front of the car through the main lower grille. This core is absolutely proven on road and track cars and continues to be an excellent and worthwhile addition to a stock or tuned VW.
Once again we have proven data on dyno and road showing that the twintercooler core by itself with no other modifications gave a huge 20°C (69°F) drop in temperatures. Comparison runs were carried out on the same day on the same dyno and in ambient temperatures of 6°C (42°F). See one of the standard run and the Forge Twintercooler run for yourself. Power and torque increased a little but bear in mind that these engines are only supposed to output 220bhp, yet we have seen them range from 230- 250bhp completely stock, and there are various limitations imposed on the stock ECU. Once remapped, the power available from the much lower intake temperatures will be able to be fully realised.
The twintercooler gives an extra 6.1 litres of capacity to your intercooler system along with a further 1016 square centimetres of frontal surface area to help improve your engine inlet air temperatures. The twintercooler has a width of 635mm x height 160mm x depth 60mm and the inlet and outlet tube size is 60mm.
No bumper modification is necessary to fit this intercooler*. All parts needed and full instructions are included, and total installation time is less than 2 hours.
- Twintercooler technology
- Unique twin core design retaining the OEM intercooler
- 10-15 BHP increase on a stock car
- Over 15-20°C drop in ambient cooling temperatures
- Includes necessary hardware and instructions for installation
- Dyno proven horsepower and torque gains
- High flow cast end tanks ensuring optimum air transition for cooling efficiency
- No cutting of the vehicle is required to fit this product
- The unique Forge Silicon hoses supplied in the “Twintercooler “ kit were designed on Solid works and have been created to include an expensive inner liner of modified silicone known as Flurosilicone. This liner means that the hoses are suitable for use with modern long-life coolants, Organic Acid Technology coolants (O.A.T.) and oil mist. The use of a Flurosilicone liner ensures that Forge silicone hoses are the best, longest lasting, and preferred choice of the discerning car enthusiasts. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically.
- This product comes complete with our lifetime warranty.
PLEASE NOTE: THE ORIGNAL O-RINGS/SEALS MUST BE RETAINED FOR USE ON THE FORGE HOSES
*This will not fit if your vehicle if it has Adaptive Cruise Control (ACC) radar sensor.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Here you will find all the information you need to know about the delivery of your purchase.
At Rival Motorsport, we pride ourselves on our efficient delivery service. If your item is in stock with us, it can arrive as fast as the next day. However, please note that each product and brand may differ in terms of stock availability, and stock statuses shown on the product page may not always reflect real-time availability.
In the event that you are in a rush for your product, we advise that you call us. Not all stock is located in the same warehouse, and we are reliant on third-party suppliers. Our team can help you identify the quickest way to get your item.
Please be aware that orders can be delayed due to factors beyond our control. From couriers to customs, we cannot always predict or prevent delays. In these cases, we are not liable for any inconvenience caused.
For smaller items, we use Royal Mail First or Second Class, depending on the item. For larger items or items of higher value, we use courier services, typically DPD. You will receive a tracking number and a one-hour time slot for your delivery.
We have established special relationships with brands from around the world, as well as in the UK. This means that even if the item you are looking for is out of stock, we will have priority access to the production queue for new items. In fact, there is a high chance that you will not find the item you need anywhere else more quickly. Our dedicated team works tirelessly to source the products you require and will always strive to get them to you as soon as possible.
Please note that we reserve the right to cancel an order if the items/delivery costs have been calculated incorrectly by our checkout system. In such cases, we will give customers the option to cover the difference if they still want the goods.
Thank you for choosing Rival Motorsport. We hope that this information has been helpful. If you have any further questions, please do not hesitate to contact us.
At Rival Motorsport Ltd, we make sure our parts match your vehicle by double-checking with the latest data from manufacturers. Sometimes, though rare, there might be small differences. So, it's smart to double-check compatibility when you get your parts. This helps avoid problems before you start fitting them.
Just so you know, if a part is marked or damaged from trying to fit it, we can't take it back. Also, we don't cover labour costs, compensation, or other expenses.
Thanks for understanding and choosing Rival Motorsport Ltd.